• Designed To Work With All Ecoboost Engines
• Increase Your Horsepower And Torque
• Fine-Tune Boost Output With Included Dial
• Designed To Stack With Pedalmax
• For Use On Unmodified Or Stock Engines

BoostMAX – add 50+whp to your 3.5l ecoboost in minutes

plug and play – works on many 3.5l ecoboost vehicles – installs in minutes

increase horsepower – reduce turbo lag and improve vehicle acceleration.

enhance low mid and high-range horsepower and torque – adds up to 4psi of extra boost.

remote boost adjustment knob included dial in your exact boost enhancement setting.

combine with JMS PedalMAX (px1114f) to maximize performance.

designed and assembled in the U.S.A.

each BoostMAX kit contains: BoostMAX boost enhancer plug and play wiring harness remote boost control knob installation kit and installation instructions.

SKU: BX600035

Fleetmax Idle Timer – Idlemax Monitors For Excessive Idle Time And Turn The Vehicle Off.

FleetMAX Idle Timer
idlemax monitors if a vehicle is idling for an extended period of time and turns off the engine. On first engine start idle time can also be based on temperature. For exandle if the vehicle temperature is less than 32-degrees f when first started additional idle time can automatically be added to the timer countdown.

features:

• easy to install: waterproof plug and play design
• supports all petrol and diesel: 2005-2023 vehicles and classifications 2-13
• stackable with FleetMAX Standard or enterprise
• idle time can also be adjusted based on temperature
• does not void your oe warranty
• does not alter the vehicles emissions equipment
• does not require obd-ii ecu programming.
• can be used in conjunction with all aftermarket obd-ii programming telematics monitors and gps systems.
• increase vehicle safety increase fuel economy and lower your insurance costs
• can be redeployed to new fleet vehicles
• designed and assembled in the U.S.A.
• lifetime warranty

SKU: FXK1114F

Fleetmax Enterprise – Limit Top Speed Drivetrain Shock And More

• The Perfect Easy To Install Plug And Play Speed Limiting Solution For Your Fleet
• Fuel Savings Through Torque Reduction
• Increase Vehicle Safety And Lower Your Insurance Costs
• Does Not Void Oe Warranty Or Alter Your Vehicles Emissions Equipment

SKU: FXE1114F

5 Star Tuning is proud to offer the best turbo whistle package on the market!

With our turbo whistle package, people will think you switched to diesel for your 2015–2017 Expedition or Navigator. The entire performance exhaust upgrade from the turbo back is included in this package. Because the Expedition/Navigator has superior noise insulation than our F-150 whistle package, this package is surprisingly quiet inside the cab. Although it is not necessary, custom tuning would be a nice addition.

SPD High-Performance Turbo Adapters

SPD’s high-flow turbo exhaust adapters replace the factory adapters on 2015-2021 Expeditions and Navigators.  These larger advanced adapters will maximize flow, greatly reduce exhaust back pressure, and help to lower Exhaust Gas Temperatures.  We have seen reductions of 100-200 degrees at 65mph at the cats.  The SPD adapters have an outlet of 2.3125″ ID compared to the stock outlet which is 2.0625″ ID.  Another benefit of the SPD Adapters is a reduction in turbo lag.  Customers have noticed that the turbo spool is much quicker.

This adapter is made in the USA from high-quality forged steel.  This adapter will directly bolt onto factory turbos or any other “drop-in” style aftermarket turbos that will accept stock adapters. These will accept any factory or aftermarket downpipes.

SPD Catted Downpipe

All of SPD’s No CEL catted downpipes use larger 3″ diameter mandrel-bent tubing, which improves throttle response, mileage, and overall performance while reducing turbo lag and exhaust temperatures. Our large diameter 400cpsi catalytic converters are designed to not cause check engine lights while offering unprecedented flow.

Product Features:

• Increase in performance
• Improved turbo spool time
• Better fuel mileage
• No CEL Catalytic Converters
• High-temp silica ceramic coated for a long lifespan
• Factory-style flanged clamps on all flared turbo and exit connections
• High-grade stainless steel clamps for a solid seal and no leaks

SPD GX Series Catback Exhaust (GXEN15SS)

Finding the right exhaust system used to be difficult until now! SPD Performance created a configurable Cat-Back exhaust system that goes from mild to loud all while being drone-free inside the cab. Manufactured using 304 stainless steel mandrel-bent 3″ tubing and a GX Series muffler, these cat-back systems are designed for maximum turbo whistle without the raspy note at high rpms. Installation is a breeze, with our systems being 100% bolt-on with no cutting needed.

SPD Turbo Adapter Install Kit

This is the install kit for our high-performance ADPT35 turbo adapters. Will fit the F-150 3.5-liter Ecoboost between 2011 and 2020.  It will also fit the 2017-2020 F-150 Raptor HO 3.5L Ecoboost and the 2015–2021 Ford Expeditions and Lincoln Navigators with the 3.5L Ecoboost.

SPD High-Performance Turbo Adapters

SPD’s high-flow turbo exhaust adapters replace the factory adapters on 2015-2021 Expeditions and Navigators.  These larger advanced adapters will maximize flow, greatly reduce exhaust back pressure, and help lower Exhaust Gas Temperatures.  We have seen reductions of 100-200 degrees at 65mph at the cats.  The SPD adapters have an outlet of 2.3125″ ID compared to the stock outlet which is 2.0625″ ID.  Another benefit of the SPD Adapters is a reduction in turbo lag.  Customers have noticed that the turbo spool is much quicker.

This adapter is made in the USA from high-quality forged steel.  This adapter will directly bolt onto factory turbos or any other “drop-in” style aftermarket turbos that will accept stock adapters. These will accept any factory or aftermarket downpipes.

SPD Catted Downpipe

All of SPD’s No CEL catted downpipes use larger 3″ diameter mandrel-bent tubing, which improves throttle response, mileage, and overall performance while reducing turbo lag and exhaust temperatures. Our large diameter 400cpsi catalytic converters are designed to not cause check engine lights while offering unprecedented flow.

Brand-New Ford OEM Hardware Included:

• 4pcs. New Ford Turbo Studs
• 2pcs. New Ford Turbo Gaskets
• 4 pcs. New Ford Downpipe Nuts

SPD Stud Removal Socket

The Shop Iron 3/8″ Drive Stud Extractor is ideal for removing stripped, rusted, broken, or smooth studs. The hex drive can be a driver with a wrench, ratchet, or impact tool. This tool will work effectively on 1/4″ to 1/2″ (6mm-12mm) studs.

• Fits 1/4″ to 1/2″ (6–12mm) studs
• Impact gun compatibility
• Ideal for removing stripped, rusted, broken, or smooth studs
• Hex drive can be a driver with a wrench, ratchet, or impact tool
• Limited lifetime warranty

What’s Included?

• SPD High-Performance Turbo Adapters (ADPT35)
• SPD No-CEL Catted Downpipe (DP35EN1517-HFC)
• SPD GX Series Stainless Catback Exhaust  (GXEN15SS) With optional 5″ Polished Tip
• Turbo Adapters Install Kit (ADPT35IK)
• Turbo Stud Removal Socket (16023)

SKU: W35EN1517HFC