Comments for 5 Star Tuning https://5startuning.com Truck Tuners & Performance Products Mon, 08 Jul 2024 03:53:22 +0000 hourly 1 Comment on 2016-2020 Ford 6.8L F-53 RV/Motorhome with Preloaded 5 Star Custom Tunes (MotorHome Magazine Reader’s Choice Award Winner!) 7015FS by Jon Emerick https://5startuning.com/product/2016-2020-6-8l-f-53-rvmotorhome-5-star-tuning-x4-5-star-tune-preloaded-device/#comment-200030 https://5startuning.com/product/2016-2018-6-8l-f-53-rvmotorhome-5-star-tuning-x4-5-star-tune-preloaded-device/#comment-200030 What a difference. Installed to our 2020 FR Georgetown and it made an instant difference. Super easy install shift points much better, no high RPM rev, engine noise decreased. Held off for some time due to price point. Silly me

]]>
Comment on 2011-2014 Ford F-150 3.5L Ecoboost CVF Aluminum Intercooler Hot-side + Cold-side Piping Kit 100AIC-6 by Marc https://5startuning.com/product/2011-2014-ford-f-150-3-5l-ecoboost-cvf-aluminum-intercooler-hot-side-cold-side-piping-kit-100aic-6/#comment-193901 https://5startuning.com/?post_type=product&p=110016#comment-193901 Piping install was alright, definetly fits tight and you have to modify the engine cover if you still want to use it. Fit and finish is good but i had to replace most of the clamps because they were a bit too big and bottomed out before it was tightly clamping the silicone couplers to the pipe(causing a leak). Also you have to use the factory 2.5″ hump hoses and screw clamps on the intercooler inlet which fit a bit loose on the piping and leak. I had to replace these with silicone hose and better/correctly sized t bolt clamps. So all in all the piping is good but definetly expect to buy $100 worth of properly sized clamps, which is a bit disappointing being they should include the right ones in the kit.

]]>
Comment on cp-e™ Austenite™ Exhaust / Ford Fusion AWD EcoBoost ’13- | CAT Back | 3.00″ OD | Mandrel Bent | 12.00″ Oval Muffler | 304 Stainless Steel | Exhaust Valve | Dual Tips , Titan Finish by Ian Z. https://5startuning.com/product/cp-e-austenite-exhaust-ford-fusion-awd-ecoboost-13-cat-back-3-00-od-mandrel-bent-12-00-oval-muffler-304-stainless-steel-exhaust-valve-dual-tips-titan-finish/#comment-182430 https://5startuning.com/product/cp-e-austenite-exhaust-ford-fusion-awd-ecoboost-13-cat-back-3-00-od-mandrel-bent-12-00-oval-muffler-304-stainless-steel-exhaust-valve-dual-tips-titan-finish/#comment-182430 I bought this back in early 2023 I believe. 5Star made this process very smooth so Kudos to you guys.
Sounds amazing and has a much deeper tone than stock without being overwhelmingly loud. Occasional drone but nothing to write home about. As fusion owners we have about 2/3 exhaust options total without going custom and I like this much more than the magnaflow. Paired with a catless downpipe and it’s a whole different sound and feeling all around. Only issue is the price but if you ever modded other platforms their catbacks/turbobacks can run you well over 2k especially on them perky German cars. But I got it on a holiday special deal for around $800/900 so at that price I would say it’s very fair. If I could post a video here for y’all I would. 10/10 would recommend.

]]>
Comment on AIR Throttle Body Spacer by Andres Larios https://5startuning.com/product/air-throttle-body-spacer-24/#comment-182278 https://5startuning.com/product/air-throttle-body-spacer-24/#comment-182278 I’m impressed with the noticeable improvement on the response at idle and take off and yes also noticed a small difference in fuel needs les to get off the line

]]>