2018+ F150 2.7L & 3.5L EcoBoost/Raptor/Expedition S&B Cold Air Intake Kit (Oiled Cotton Filter) 75-5122
$349.002018+ Expedition will require 1 additional hole drilled during the installation of plastic clips for the front snout.
Showing 1–16 of 24 results
2018+ Expedition will require 1 additional hole drilled during the installation of plastic clips for the front snout.
2018+ Expedition will require 1 additional hole drilled during the installation of plastic clips for the front snout.
NEW! JLT PERFORMANCE COLD AIR INTAKE SYSTEM FOR 2015-19 FORD F150 3.5L AND 2.7L ECOBOOST, INCLUDING RAPTOR! MORE POWER, GREAT SOUND AND LOOKS AWESOME! NO TUNE REQUIRED!  JLT’s 2015-19 EcoBoost Cold Air Intake is fully computer designed to optimize space for best fit and finish. Constructed from Roto-molded plastic to keep the inlet air temps…
Note: For 17 & newer models, the IAT sensor will have to run at an angle under the engine cover rather than following the factory IAT sensor route.
The AEM 21-8128DC Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle’s restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford F150 EcoBoost models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for…
2015 – 2018 Ford F-150 V6-2.7L Twin Turbo Ecoboost 2015 – 2018 Ford F-150 V6-3.5L Twin Turbo Ecoboost 2017 – 2018 Ford F-150 Raptor V6-3.5L Twin Turbo Ecoboost Power-Flow Air Intake System Incl. 4 in. And 3.5 in. Dual Intake Tubing/Filter/Heat Shield/Hardware/Instruction w/MR Technology Gains +11.0 HP/Torque +11.0 ft. lbs. Polished Product Features 4 in. And 3.5 in….
Whipple, known for its industry leading upgrade systems and technological innovations, has now brought the same technology to the 2015-2016 2L V6 F150 with the high-velocity cold air intake system. The stage 1 system features the roto molded high-velocity cold air intake to lower the inlet losses through the factory filter and airtube and unleashing…
2015 – 2019 Ford F-150 V6-2.7L Twin Turbo Ecoboost 2015 – 2019 Ford F-150 V6-3.5L Twin Turbo Ecoboost 2017 – 2019 Ford F-150 Raptor V6-3.5L Twin Turbo Ecoboost Power-Flow Air Intake System Incl. 4 in. And 3.5 in. Dual Intake Tubing/Filter/Heat Shield/Hardware/Instruction w/MR Technology Gains +11.0 HP/Torque +11.0 ft. lbs. Polished Product Features 4 in. And 3.5 in….
The COBB Intake for the second generation Ford Raptor checks every box that enthusiasts expect from a high-quality bolt on upgrade. The restrictive factory piping to the turbos is replaced with twin 3″ mandrel bent aluminum tubing to maximize airflow while custom silicone couplers ensure perfect OEM-like fitment. The injection molded – fiber reinforced airbox…
Dual Large 5-Layer Performance Air Filters: This sealed intake system utilizes pre-oiled, large 7″ tall radial flow performance air filters with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. Also included is a Magnum SHIELD Pre-filters to protect your performance air filter from water splash or heavy rainstorms. Top Mounted Heat…
The K&N 63-2592 AirCharger air intake system replaces the restrictive factory air filter and air intake housing on specific Ford F150 EcoBoost models. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the…
Quantum Cold Air Intake System Dynamic Air Scoop (D.A.S.) increases cool, fresh airflow for maximum performance and throttle response for your Ford F-150 & Raptor. It is designed to capture the coolest, freshest air from the top of the front grille to ensure increased air velocity into your air intake system. Lower Intake Air Temperatures:…
Unique One-Piece Housing: The smooth one-piece sealed housing is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. 3″ Equal Length Intake Tubes: Dual 3″ mandrel-bent Blue powder-coated aluminum equal length intake…
NEW! JLT PERFORMANCE COLD AIR INTAKE SYSTEM FOR 2018-19 FORD F150 3.5L AND 2.7L ECOBOOST, INCLUDING RAPTOR! MORE POWER, GREAT SOUND AND LOOKS AWESOME!  JLT’s 2018-19 EcoBoost Cold Air Intake is fully computer designed to optimize space for best fit and finish. Constructed from Roto-molded plastic to keep the inlet air temps cool, no hot…
Dual Large 3-Layer “Oil-Free” Performance Air Filters: This intake system utilizes oil-free, large 7″ tall radial flow performance air filters with 3-Layer synthetic media for maximum convenience. Also included is a Magnum SHIELD Pre-filters to protect your performance air filter from water splash or heavy rainstorms. Top Mounted Heat Shield Design: aFe developed this back…
Give your 2015-2020 F-150/F-150 Raptor, Expedition, or Lincoln Navigator that added punch you crave with the EVO9104 Evolution Cold Air Intake System by Injen Technology. The EVO9104 is specifically engineered for the 2.7L and 3.5L EcoBoost engine. Every EVO9104 cold air intake is made in the USA from cross-linked high-density XLPE polyethylene for extreme durability….