2018+ F150 2.7L & 3.5L EcoBoost/Raptor/Expedition S&B Cold Air Intake Kit (Oiled Cotton Filter) 75-5122
$349.002018+ Expedition will require 1 additional hole drilled during the installation of plastic clips for the front snout.
Showing 1–16 of 49 results
2018+ Expedition will require 1 additional hole drilled during the installation of plastic clips for the front snout.
2015-2020 F150 2.7/3.5L EB/Raptor 2018-2021 Expedition 3.5 EB CVF Titan Front Mount Intercooler Kit (Silver) 001-150-15-B Direct bolt-on replacement – no vehicle modification required 40+ degree reduction in Charge Air Temperature (CAC) observed in real-world conditions Over 50% greater core volume than OEM intercooler (20.5″ x 4.5″ x 9″) High-flow cast end tanks ensure considerably…
2018+ Expedition will require 1 additional hole drilled during the installation of plastic clips for the front snout.
Whipple, known for its industry leading upgrade systems and technological innovations, has now brought the same technology to the 2017+ 3.5L V6 F150 and Raptors with the high velocity cold air intake system. The stage 1 system features the roto molded high velocity cold air intake to lower the inlet losses through the factory filter…
40+ degree reduction in Charge Air Temperature (CAC) observed in real-world conditions (original Titan featuring similar proprietary core composition) Condensation drain on the cold-side end tank allows for seamless draining of built-up fluid Over 82% greater core volume than OEM intercooler (21″ x 9.43″ x 5.32″) High-flow cast end tanks (featuring the CVF logo) ensure…
Note: The Titan will fit 21+ models with a slight modification to the lower cold side hose (included with the intercooler). Direct bolt-on replacement – no vehicle modification required 40+ degree reduction in Charge Air Temperature (CAC) observed in real-world conditions Over 50% greater core volume than OEM intercooler (20.5″ x 4.5″ x 9″) High-flow…
Keep those intake air temps down! With Mishimoto’s Performance Intercooler for the 2015+ Ford F-150 EcoBoost, your engine will reach a better level of cooling from the help of both an increase in core volume by 77% over stock and external fin surface area by 163%. We put our core through some grueling tests to…
40+ degree reduction in Charge Air Temperature (CAC) observed in real-world conditions (original Titan featuring similar proprietary core composition) Direct bolt-on replacement – no modifications required other than removal of the AGS (active grille shutters) Condensation drain on the cold-side end tank allows for seamless draining of built-up fluid Over 82% greater core volume than…
Whipple, known for its industry leading upgrade systems and technological innovations, has now brought the same technology to the 2017+ 3.5L V6 F150 and Raptors with the high velocity cold air intake system. The stage 1 system features the roto molded high velocity cold air intake to lower the inlet losses through the factory filter…
ROUSH Performance’s newly-designed cold air intake for the 2015-2017 3.5L & 2.7L EcoBoost V6 F-150 engine brings staggering performance increases that can be achieved with an installation that takes under an hour. Your 2015+ Ford F-150 3.5L or 2.7L EcoBoost V6 will benefit greatly from the addition of this ROUSH Cold Air Intake Kit, which…
Keep those intake air temps down! With Mishimoto’s Performance Intercooler for the 2015+ Ford F-150 EcoBoost, your engine will reach a better level of cooling from the help of both an increase in core volume by 77% over stock and external fin surface area by 163%. We put our core through some grueling tests to…
Product highlights for the 2018+ F-150 ROUSH 2.7L and 2017-2019 3.5L EcoBoost V6 Cold Air Intake Kit: Fits 2018+ F-150 2.7L EcoBoost V6 and 3.5L EcoBoost V6 (Including Raptor) Increased engine performance with no PCM re-calibration required! The most highly-engineered cold air intake kit on the market Up to 25% less intake restriction compared to stock…
The COBB Intake for the second generation Ford Raptor checks every box that enthusiasts expect from a high-quality bolt on upgrade. The restrictive factory piping to the turbos is replaced with twin 3″ mandrel bent aluminum tubing to maximize airflow while custom silicone couplers ensure perfect OEM-like fitment. The injection molded – fiber reinforced airbox…
Dual Large 5-Layer Performance Air Filters: This sealed intake system utilizes pre-oiled, large 7″ tall radial flow performance air filters with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. Also included is a Magnum SHIELD Pre-filters to protect your performance air filter from water splash or heavy rainstorms. Top Mounted Heat…