5 Star Tuning is proud to offer the best cold air intakes on the market!

Maximum Performance Our cold air intake for the 2017-2018 Ford Powerstroke 6.7L was engineered to flow 55.97 percent better than stock and minimize air restriction. This kit includes a fully enclosed airbox that keeps out engine heat and protects the filter from dirt.

Protect Your Engine This kit comes with a massive, highly-efficient air filter that protects your engine and results in better performance.

Available in either 8-layer Cotton Cleanable or Dry Extendable media.

Less Restrictive Than Stock We swapped the location of the intake box and battery, placing our intake closer and directly in line with the front air inlet. In addition, our intake tube has minimal bends as it connects to the turbo inlet. These details result in a significant decrease in restriction compared to the stock intake.

Large Clear Lid Our Signature Large Clear Lid features a rubber lid seal that keeps out power-robbing engine heat and provides great looks.

No More Check Engine Lights S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with either stock calibration or enhanced tuning. This kit was designed to avoid check engine lights with its properly mapped Mass Air Flow Sensor.

Million Mile Warranty – S&B Air Filters and Intake Kits purchased from Authorized dealers are backed by S&B’s Million Mile Limited Warranty. Only when used on vehicles for which they were designed and under typical driving conditions.

If one of our products is defective or not performing correctly, S&B will replace it.

Breathe Easy. Your Engine and warranty are protected – As long as you properly install and maintain your intake kit or filter, installing a S&B Intake Kit or Air Filter will not void your vehicle’s warranty.

• Fits 2017-2019 Ford F250 / F350 V8-6.7L Powerstroke
• Oiled Filter Type
• Cotton Cleanable Filter
• Quantity Of Oil 81 Grams
• Replacement Filter KF-1063
• Cotton Gauze Filter Material
• Red Filter Color
• Red Oil Color
• Black Color
• Engine Manufacturer Powerstroke
• Street Legal In All US States
• CARB Exempt ID D-590-23
• Diesel Fuel Type
• 6.7 Liter
• V8 Cylinder
• Million Mile Warranty

SKU: 75-5085-BKJF

5 Star Tuning is proud to offer the best air filters on the market!

COBB High Flow Filters are designed to permit very high flow rates, minimize restriction, maximize filtration and provide a long life filter. It uses proprietary Woven cotton and metal mesh with a precision molded rubber base.
Why?

COBB High Flow Filters are designed to permit very high flow rates, minimize restriction, maximize filtration and provide a long life filter. Using proprietary woven cotton and metal mesh with a precision molded rubber base, the COBB High Flow Filter ensures that only clean air passes into your engine for maximum efficiency. Why not treat your car to fresh air with a COBB High Flow Filter and let it reward you with increased power and fuel economy!
Features
Replacement Air Filter for Ford F-150 HCT intakes MY2018+

Washable/Reusable Cotton Woven Media
Precision Molded for Direct Drop In To The Factory Air Box
Increased Air Flow While Maintaining Filtering Efficiency
Pre-Oiled
Compatible with COBB Accessport OTS Maps

Emissions
This part is not an emissions-related part and therefore can be used on Emission Controlled Vehicles.

SKU: FOR-009-100

5 Star offers you the best cold air intake on the market!

Maximum Performance Our cold air intake for the 2018-2019 Ford F150 3.0L Powerstroke was engineered to minimize air restriction and flow 20.41 percent better than stock.

This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out unwanted engine heat. Premium Silicone Rubber. The air filter, couplers, inlet, and tube seal are made from Premium Silicone Rubber. Silicone won’t crack, has exceptional tear strength, and can handle temperatures as high as 400F.

Demand Better. Demand S&B.

No Check Engine Lights Lights. S&B devotes a huge amount of resources to engineering our intakes that allow your engine to run properly with stock calibration or enhanced tuning. The JL intake utilizes your stock air temperature sensor and features an aluminum CNC lathed crankcase breather connection, that ensures a perfect snap-on fitment.OEM Fit and Finish.Featuring a fully enclosed one-piece box design.

The lower box prongs integrate with the OEM mounting locations to ensure a perfect fit. The Silicone Fender Seal is designed to pull air from the stock location and retains the use of the stock ram air tube. This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine.

Available in either 8-layer Cotton Cleanable or Dry Extendable media. Maximize Airflow. The OEM intake tube is highly restrictive and flattens out toward the center of the tube. S&B’s intake tube doesn’t flatten out and is designed to minimize restriction with one Clean line from the throttle body to the air box. Less obstruction means more airflow and better performance.

Large Clear Lid. Our Signature Large Clear Lid provides great looks. Featuring a rubber lid seal to keep out power-robbing engine heat.

Million Mile Warranty – S&B Air Filters and Intake Kits purchased from Authorized dealers are backed by S&B’s Million Mile Limited Warranty. Only when used under typical driving conditions and on vehicles or which they were designed. If one of our products is not performing properly or is defective, S&B replace it.

Breath Easy. Your Engine and warranty are protected – Installing a S&B Intake Kit or Air Filter will not void your vehicle’s warranty, as long as you properly install and maintain your intake kit or filter.

• Fits 2018-2019 Ford F-150 V6 3.0L Powerstroke Diesel
• Filter Dry Extendable
• Filter Type Dry
• Color Black
• Street Legal In All US States Pending
• Fuel Type Diesel
• Cylinder V6
• Replacement Filter KF-1058D
• 3.0 Liter
• Filter Material Paper
• Filter Color White
• Million Mile Warranty

SKU: 75-5126D-BKJF

5 Star Tuning is proud to offer the best Cold Air Intake in the market!

Maximum Performance

Our cold air intake for the 2018-2019 Ford F150 3.0L Powerstroke was engineered to minimize air restriction and flow 20.41 percent better than stock.

This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

No More Check Engine Lights

S&B devotes a huge amount of resources to engineering our intakes that allow your engine to run properly with stock calibration or enhanced tuning.

This kit was designed to avoid checking engine lights with its properly mapped Mass Air Flow Sensor. The MAF sensor is moved significantly further down the intake tube by employing a MAF Extension Harness and Harness Bracket, lowering restriction while maintaining OE signal values.

Large Clear Lid

Our Signature Large Clear Lid provides great looks. Featuring a rubber lid seal to keep out power-robbing engine heat. This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine.

Available in either 8-layer Cotton Cleanable or Dry Extendable media.

Huge Silicone Air Scoop

Features a large silicone air scoop that feeds more cold air to the filter. More airflow equals better performance. The air filter, coupler, tube seal, and scoop are all made from Premium Silicone Rubber. Silicone won’t crack, has exceptional tear strength, and can handle temperatures as high as 400F.

Million Mile Warranty

S&B Air Filters and Intake Kits purchased from Authorized dealers are backed by S&B’s Million Mile Limited Warranty. Only when used under typical driving conditions and on vehicles or which they were designed. If one of our products is not performing correctly or is defective, S&B will replace it.

Breath Easy

Your Engine and warranty are protected – Installing an S&B Intake Kit or Air Filter will not void your vehicle’s warranty, as long as you install and maintain your intake kit or filter properly.

Product Details:

• Filter Material Cotton Gause
• Filter Color Red
• Filter Type Oiled
• Filter Cotton Cleanable
• Quantity Of Oil 80 Grams
• Replacement Filter KF-1058
• Oil Color Red
• Color Black
• Street Legal In All US States Pending
• Fits 2018-19 Ford F150 V6 3.0L Powerstroke Diesel
• Cylinder V6
• Warranty Million Mile Warranty
• Fuel Type Diesel
• 3.0 Liter

SKU: 75-5126-BKJF