Powertrain Warranty Protection for Custom Tunes Concerns about voiding Ford’s Powertrain Warranties keeps many people from investing in custom tuning, which seriously limits the amount of performance their F150, Raptor, or Ranger is capable of. Custom tuning always carries the risk of Ford or your dealer not covering Powertrain repairs under warranty. Well, we here…
2017-2022 Ford F-250 6.2L/7.3L Gas J&L 3.0 Oil Separator 3oz Capacity Solid billet construction. Plug-N-Play Design Multi stage filter system designed to collect the finest of vapors and drop them into the easily removable bottom while allowing clean air to pass through to the intake. How does it work? During the process of venting crankcase…
Monitor your 0-60mph, 60-130mph, 100-200kmh, 1/4 mile, 1/2 mile performance, and more! Dragy uses high-speed GPS satellites to accurately measure your vehicle’s performance within 1/100th of a second, producing identical results to the much more expensive and cumbersome VBOX system, in a less expensive and easier to use package. The Dragy software automatically charts slope…
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services…
WE WOULDN’T DO IT IF IT DIDN’T MAKE POWER Test results on aFe’s Dynojet dyno showed power gains across the power band, topping out at +17 HP and +15 lb-ft torque at 6,000 rpm. Testing was conducted on a 2020 Mustang 5.0 comparing stock and the aFe Power BTB (all tests conducted using 91-octane fuel)….
MAXIMUM PERFORMANCE Our cold air intake for the 2020-2022 Ford 7.3L Super Duty was engineered to minimize air restriction and flow better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. NEW SNAP IN LID DESIGN Our new snap-In lid design requires no screws…
We support and offer tunes exclusively for the HP Tuners nGauge. Our email tunes will not work for the Lund version of the nGauge. If you have a Lund nGauge, you will need to purchase one of our nGauge and email tunes combo packs. (https://5startuning.com/product-category/brands/hp-tuners/)
Serrated/Helix Design: The serrated/helix design creates air turbulence in the intake manifold. This turbulence increases the air pressure in the combustion chamber resulting in increased horsepower, torque and improved throttle response. The Serrated/Helix combination design also reduces intake whistle that occurs with other helix only designs. 6061-T6 Billet Aluminum Construction: All Silver Bullet Throttle Body…
Powertrain Warranty Protection for Custom Tunes Concerns about voiding Ford’s Powertrain Warranties keeps many people from investing in custom tuning, which seriously limits the amount of performance their F150, Raptor, or Ranger is capable of. Custom tuning always carries the risk of Ford or your dealer not covering Powertrain repairs under warranty. Well, we here…
2017-2022 Ford F-250 6.2L/7.3L Gas J&L 3.0 Oil Separator 3oz Capacity Solid billet construction. Plug-N-Play Design Multi stage filter system designed to collect the finest of vapors and drop them into the easily removable bottom while allowing clean air to pass through to the intake. How does it work? During the process of venting crankcase…
TUNE YOUR SENSITIVITY With Pedal Monster’s OBD-II connection, sensitivity is added intelligently based on speed, transmission, and throttle information. Simply take your foot off the pedal momentarily to adjust the mode on-the-fly through the iDash or phone application. Choose City, Sport, or Track, each with 10 levels of refinement, allows you to tune out “dead spots” found in…
MAXIMUM PERFORMANCE Our cold air intake for the 2020-2022 Ford 7.3L Super Duty was engineered to minimize air restriction and flow better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. NEW SNAP IN LID DESIGN Our new snap-In lid design requires no screws…
K&N’s line of washable replacement cabin air filters are designed to filter your incoming air using state-of-the-art filtration technology – protecting your vehicle’s occupants, interior, and HVAC system from pollutants and unpleasant odors. Engineered to be washable, reusable, and durable, this cabin filter is designed to last for the entire lifespan of your vehicle! INCREASED…
SCT 7015 X4 Flash Device For Ford Applications